Zincor - a metal protector primer
.png){kind=spacer}
.png){kind=icon}
.png){kind=icon}
Zincor is a zinc-rich metal primer with double protection against corrosion (barrier and cathodic protection). Barrier protection creates an insulating layer over the metal. This layer remains impervious for as long as possible and protects against environmental aggression. Cathodic protection is the ability of the zinc coating to gradually oxidize and sacrifice itself to the metal substrate.
The peculiarity of the material is that the anti-corrosion protection is higher than that of epoxy, polyurethane and other anti-corrosion compositions. The minimum number of layers is 1 layer.
How to use
- On its own, without overcoating - the coating is capable of long-term protection of metal without additional overcoating.
- As a primer for subsequent painting - decorative enamels last up to 2 times longer if applied over Zincor.
- For repair and restoration of hot-dip galvanized coatings.
- For corrosion protection of weld seams - it is possible to weld over the coating.
PURCHASING INFORMATION
Email us zincor.paints@gmail.com to place your order. You can also order online.
Self-delivery or delivery on the day of request:
- Moscow-South, 11 Promyshlennaya str., building 4, gate 54
- St. Petersburg, 12 1st Verkhniy lane, lit. 3, p/z Parnas
- Kazan, 9B Tekhnicheskaya str.
- Ekaterinburg, 22G Artinskaya str.
- Krasnodar, 24 Rostovskoe highway, lit. A
- Nizhny Novgorod, 19k2 Okskaya Gavan str.
- Tula, 6/3 Khanishki proezd
In other cities shipped by transport company during the day.
Payment: bank transfer or cash on receipt.
Goods are always in stock!
Area of application
Zincor is suitable for metal protection under weather conditions in all macroclimatic regions, in the soil, it is resistant in fresh and sea water, water solutions of salts (pH = 6.0-10.0), in ethyl alcohol and its aqueous solutions. The coating is not resistant to a number of organic solvents.
The composition is widely used in such areas as industrial and civil construction, transport construction, oil and gas complex, energy, railroad facilities, port and hydro facilities, motor transport, forging and artistic forging.
Compatibility with other paintwork materials
As a primer Zincor is compatible with many coatings, including alkyd, acrylic, acrylic-urethane and polyurethane bases.
Among the coatings produced by the company Zincor are perfectly compatible with Zincor primer:
- Zincor Aluminum - protective and decorative enamel with non-tarnishing silver-gray color
Technical specifications
| Color | gray, matte |
| Content of zinc | 96% |
| Thickness of one laye | 40-60 μm |
| Consumption per 1 m2 at 40 μm | 250 g |
| Thinner | Solvent, xylene (5-10% by mass) |
| Adhesion | 1 point |
| Application at temperatures | from -30°C to +60°C |
| Drying time at different temperatures | from 10 to 50 minutes |
| Drying time between layers | 20-40 minutes |
| Density | 2,5 g/cm3 |
| Impact strength | 50 cm |
| Elasticity at bending | 1 mm |
| Temperature resistance (long-term, short-term) | from -60°С to +160°С |
| Viscosity | Thixotropic |
Why is it convenient and profitable to buy from Zincor?
- Zincor primer is always in stock in all warehouses
- Prices are guaranteed to be lower than other sellers
- Delivery in Moscow or to TK is possible on the day of treatment
- Cumulative discounts and personal shares for regular customers
- Shipment with deferred payment is possible
- We guarantee quality and high protection rates
Instructions for use
Step 1: Surface preparation
- Surface cleaning (manual or mechanical) - it is necessary to remove loose rust, old coatings, contamination.
- Degreasing with solvent or orthoxylene
- Roughing - to improve adhesion
Step 2: Preparation of the composition
Zincor must be well mixed to a homogeneous mass (with a drill with nozzle) or with a mixer. Further, while working stir every 15-20 minutes, so that the zinc does not sink to the bottom. If necessary dilute to the working viscosity with the solvent (5-10% by mass).
Step 3: Application
The compound can be applied by any means: with a brush, a roller, by dipping or with a spray gun. Application temperature from -30°C to +60°C. Apply the second and subsequent coat after 30 - 60 min.
Safety precautions
Always use protective equipment: goggles, mask, respirator, paint suit, gloves. Apply in a ventilated area. Do not apply in the vicinity of fire.
Read full instruction before use!
Storage and Transportation
Store in a tightly closed container from t -30 ° C to +30 ° C, protected from sunlight and high humidity.
Shelf life is not limited.